Posted on

Buying Wholesale Fidget Spinners

There’s no item in more demand at present than the fidget spinner – everybody is looking to get their hands on one! This flourishing new market is presenting companies with incredible opportunities to make a profit, but with the industry fast-moving, it’s vital that you make the right business moves if you want to get ahead of the rest. Here are a few key tips and pieces of advice that will enable you to capitalize with fidget spinners buy creating a wholesale account.

Why buy wholesale

You may be asking yourselves the question: why should I buy wholesale fidget spinners? The answer is very simple. Finger spinners are in extremely high demand at the moment, and when you buy in bulk you can make whopping savings that will help balloon your profits. For example, if you purchase more than $200 worth of fidget spinners from us at in one go, you’ll start receiving massive discounts. And if you make a $500 buy, shipping is free! If you harbour ambitions of running a lucrative hand spinner business, then buying in bulk is the only way to go.

Create a Wholesale Account

Buy from us!

When you buy from us, we offer not only great savings but stunning customer service too – we pride ourselves on quick delivery and supreme quality. The fidget spinners that you buy from us go through rigorous testing to ensure that they meet certain standards, and you’re never going to be stuck with a bad batch.

If you’re running a business, then you need to be dealing with people who are reliable – having a top supplier is paramount to making sure everything else runs smoothly. Our company places massive importance on delivery, and when you order with us, you know that you’ll receive exactly what you’ve ordered at the time you’d expect it to arrive.

Why you should avoid buying fidget spinners from China

China may have many very attractive hand spinner wholesale deals out there, but there are a few reasons why you should be very vary of buying fidget spinners from the region. They all boil down either poor manufacturing or poor customer service – and both can easily be avoided.

Historically, China has been known for its cost-cutting measures which have allowed the country to produce more for less – hence why so much comes from China nowadays. Nowhere are these glaring issues more apparent than in fidget spinning.

While smaller US-based independent companies and, indeed, the bigger US companies put a lot of care and effort into producing high-quality durable finger spinners, you’ll find none of this with Chinese spinners. The bad manufacturing can result in an unbalanced spinner which will feel wobbly and not spin for as long. Cheap bearings are also prone to getting dirtier more quickly, a problem inherent with all spinners, but worst with low-grade ones.

And unfortunately, these substandard products usually end up slipping through the net due to the bad quality control systems in place in China. Without stringent checks from manufacturing companies, it’s inevitable that many bad batches are going to end up on the market. Furthermore, a lot of the finger spinners made in China are often direct rip offs of those made in the US and elsewhere.

It is your customers who will suffer most from a bad product, but the sub-par customer service will hit you and your company directly. When you buy finger spinners wholesale from China, you’re often left in the dark about how long it will take you to get your stock. It is common for communications to dry up for several weeks, leaving your questions unanswered and you waiting. Some companies are up front about the long delivery times, although others will string you along.

Even if you do eventually get what you’ve ordered, imagine if there’s an error – by the time you finally get started, you’ll have wasted not just weeks, but months. That saving you thought you were making could end up costing big.

Why you should stock fidget spinners in your store

Right now, everybody wants to get their hands on a fidget spinner, so what better move to make than to start stocking them in your store? The beauty of these toys is that they are so cheap, even people who aren’t totally into them will consider buying them just out of curiosity. And fidget spinners are becoming collector’s items too – fans don’t just stop with one! So if you can stock something in your store that’s a little different to the rest, the chances are that it’ll fly off the shelves!

Types of fidget spinners you could stock

The fidget spinner market is very diverse, so you have plenty of options when it comes to deciding stock. If you just want to sell fidget spinners on the side or as a novelty item in your store, then the budget, plastic spinners will probably be best. These are very cheap and more likely to be bought by those who have heard about fidget spinning, and just want to spend a few dollars to discover what it’s all about.

If you’re building a fidget spinner company, then you should think about stocking metal and wooden fidget spinners too, where you’ll be able to create bigger profit margins.

Final thoughts

The fidget spinner wholesale market is certainly an area that you should consider moving into, and fast – in fact, striking while the iron is hot is vital. We’re currently in a phase where finger spinners are enjoying unprecedented popularity, and they are never going to attract as much attention as they are doing right now. The publicity is also extremely positive.

Most importantly, however, if you do choose to invest, make sure you do it properly. Buying great products from a trusted name is going to pay dividends in the long run, unlike if you go for obscure brands from China. Having great communication with a company you know will continue to provide you with high quality fidget spinners on time every time is invaluable, and allows you to prioritize your time and make your business a success.

Posted on

Why the Fidget Spinner Craze is taking the Nation by Storm

The fidget spinner is one of the most exciting albeit bizarre crazes that we have seen in recent years. These toys started to appear in mid-to-late 2016 but have seen a surge in popularity in 2017 as awareness about them has spread.

They come in all different shapes and sizes, varying hugely in price. There are plenty of cheaper commercial finger spinners out there for the casual user, but devoted fans are also able to get their hands on premium equipment if they so desire.

Let’s take a look at what fidget spinners are, why people would want to buy one and have a glance at the different types.

Origins of the Fidget Spinner

Without the internet, it’s true that we may never have seen the fidget spinner. The power of the web has brought likeminded people together and allowed us to take on understated yet ever-present problems such as fidgeting. It was in 2016 that a Kickstarter project snowballed, surpassing its $15,000 target, accruing an astonishing $6 million. The project in question was a fidget cube toy, with fidgety favorites such as rollers, buttons and switches, all incorporated in one compact device. The project went viral on social media and the rest is history.

What do fidget spinners do and why should I buy one?

You can glean from the name that fidget spinners have been designed to help tackle fidgeting. From children with ADHD to adults numbed with boredom in the office, all demographics have been struck with the fidgeting urge at some point in time – but until now, there has never been a specially designed toy to help overcome the issue. Hence people have been left with dirty habits such as biting their nails, or driving other people up the wall by clicking their pen or tapping their fingers.

The finger spinner comes with none of these issues – indeed, it isn’t even a distractor for those in the workplace, with many anecdotal reports suggesting that the hypnotic whizz of the spinner while in motion actually helps to increase concentration levels. Furthermore, the fidget spinner requires only one hand, leaving your other one free to complete any tasks you may have.

What types of finger spinners are there?

Finger spinner wholesale products tend to be made out of plastic, as these are by far the cheapest to produce. The 3D-printer is the fidget spinner manufacturer’s greatest friend as these allow developers to make spinners of various designs and colorings. That there are spinners available to consumers at such low costs is wonderful news for the finger spinner industry as a whole, given that people can feed their curiosity with a budget spinner, before potentially moving up to a higher class product afterwards.

The most common hand spinner wholesale designs at present are the two-bar and tri-bar spinners. These are easy to make, and those with R188 bearings can spin for three to four minutes on average. These are the spinners which are making the biggest waves in the media right now.

Some of the more unconventional manufacturers have looked to combine the fidget spinner with other EDC items. For example, there have been attempts to make spinners that also double up as pocket knives or bottle openers. These are likely to remain niche but the idea of a multi-purpose spinner perhaps hints at the way the fidget spinner world may go as it develops.

The more expensive fidget spinners that you see are made of metal, although there is a tiered system here too. The best spinners that money can buy tend to be made of titanium, as these are well-balanced and dense enough to offer a snug fit between the fingers, ample fidgetability and long spinning times. Aluminium, stainless steel, brass and coppers are other metals that you can expect to see fidget spinners made from. These spinners often cost upwards of $100, and hardcore fans are often prepared to pay even more if they are scarce!

Why the US is best 

It’s probably no surprise to you that China is trying to get in on the finger spinner act, with their creations. However, while the Chinese can offer their products cheaper, the reality is that these are often inferior due to the low quality materials and production methods that go into making their spinners. Moreover, Chinese fidget spinners are often just rip offs of spinners developed by American companies.

The fidget spinner wholesale market is now very present in the USA too, though, and you can definitely trust the spinners that you buy from US companies. The bigger names are able to mass produce the cheaper, plastic hand spinners that you see on sale for just a few dollars. But many have also indulged in making higher quality products, such as those that we see from the likes of Torqbar and Rotablade.

Final thoughts

The finger spinner wholesale world is certainly very volatile, and with less than a year of history to go on at the time of writing, no one can be truly sure about what will happen in the future – but we can make a few educated predictions. The fidgeting bug has been around for decades, and finally there’s a solution. While there’s no serious “purpose” to the hand spinner, they can’t be considered a pointless fad like the Rubik’s Cube perhaps could. What’s more, finger spinners have acquired massive appeal with all ages.

In addition, fidget spinners are astonishingly convenient. They are small enough to carry around on your person, and that they can be operated with one hand is another big plus. And with all the funky designs out there, finger spinners are becoming a fashion statement too. We reckon you’ll be hearing plenty more about these toys for years to come.

Posted on

What You Need to Know About Bearings

Fidget spinners may look the same on the outside, but the differences on the inside can completely change what they’re like. The key to how good a fidget spinner is can be found in the bearings. They come in different materials and the type of bearing used can have a big impact on the spin time of a finger spinner. We have focussed in on the main bearings that are being used in the most popular fidget spinners right now, so you can better understand your toy.

There are varying numbers of bearings in fidget spinners and the amount that are present in each one can have a direct impact on the spin-time that you can expect. Spinners with fewer bearings find it more difficult to rotate around as smoothly, hence there is more friction and they will slow down sooner. Whatever the bearing set-up in your fidget spinner, keeping it lubricated will help to deliver better spins.

However, it’s the material that the finger spinner itself is made with that will have the biggest impact on the spin time. Metal spinners can whirl around for three, four or even five minutes – especially the Torqbar – whereas you’ll be lucky to get more than a minute with a 3D-printed plastic spinner.


The bearings that are made of ceramic tended to work the best, delivering a smooth spin that wasn’t as prone to losing speed due to grit. Traditional ball bearings on the other hand came up a little short. Crucially, the design of the fidget spinners and compactness of them – particularly around the finger pads – is vital. A well-designed fidget spinner will not leave the bearings exposed.

People who choose to make their own fidget spinners – usually 3D-printed ones – tend to use skateboard bearings in their designs. They’re small enough to fit nicely into a fidget spinner, and they rotate effortlessly with limited friction.

Having a smooth bearing set-up will also promote a quiet spin. The more expensive spinners make far less noise for that reason. For example, while the Torqbar and Rotablade Stubby models aren’t cheap, they have been expertly crafted with high-quality bearings to produce consistent spins time and time again.

If you’re buying an expensive fidget spinner, then you shouldn’t end up having problems with your bearings as they will be utilizing the best materials with the optimum number of bearings spaced the right distance from each other.


What all bearings have in common is the tendency to slow down and become gritty over time as particles and dirt get into the toy. To help reduce the grittiness and extend spin time back to what it was, you should regularly clean your spinner by soaking it in water or spraying alcohol. However, ensure beforehand that it is safe to use your chosen cleaner with your spinner otherwise you may irreparably damage the bearings.

Whichever fidget spinner you go for, do take the time to see what bearings are used, so you can establish which works best for you.

Posted on

The Story of the Fidget Cube, a Remarkable Kickstarter Project

With the internet, the seemingly impossible really can happen. In the past, a product like a fidget toy would probably never have been invented because convincing enough people to invest in a strange concept would have been tough. However, nowadays, there’s a huge audience out there, and finding like-minded people interested in niches is comparatively easy. And that’s what happened with the Fidget Cube, a Kickstarter-funded product that raised a whopping $6.1million through 150,000 funders – the goal was a tiny $15,000! Antsy Labs and Matthew and Mark McLachlan are the brains behind the magic, and they’ve been explaining what makes an aimless toy with switches, spinners and rollers to ease boredom so attractive to consumers.

The McLachlans were sceptical about their ability to invent a popular product despite having a passion for it but eventually settled on the idea of a Fidget Cube and went about putting the wheels into motion.

In 2015, they founded Antsy Labs, however they claim that was just the official date and that they had been a work in progress long before that. Before the Fidget Cube, they were trying to secure funds for a charging dock known as ‘Duet’.


The Fidget Cube has been in development since 2012 but was put on the back burner with all of the other work that the brothers were working on. The idea came because this was a product that they thought they could benefit from themselves. They recognized the issue with clicking a pen or other annoying activities and wanted to create a solution that was not only more satisfying for the user, but less frustrating to other people – hence the Fidget Cube was born, and soon after, the specific fidget spinners would be too.

Were the brothers sure that the idea was going to be a success? Not at all. As a totally unique invention, there was no precedent for it. When testing the waters, the response they got was generally one of confusion, with few understanding the purpose of the device or why somebody would want one. But they stuck to their guns, hoping that if they had found something which helped them, it would also be of interest and use to others.

However, it was the thought that the Fidget Cube wouldn’t hit the jackpot that made them delay its release for so long while other ambitions took priority. But they needn’t have had those concerns, as the Fidget Cube proved to be head and shoulders above any of the previous four projects that they had launched on Kickstarter.


Those products included he aforementioned Duet, which was then followed by a similar product known as the ‘Trio’, which answered people’s requests to develop a charging deck that also supported tablet charging. However, while useful, the project was scrapped by Kickstarter when it failed to reach the required funding. Further showing the diversity of the brothers’ inventions, they also invented a table-top game called Storm the Gate. And in an attempt to showcase the struggles and successes of Kickstarter hopefuls, the brothers tried to launch a book called Bright Ideas. Somewhat ironically, the project didn’t reach its goal – an indicator of the real struggles that inventors face.

Recovering from setbacks isn’t easy, since much time and effort has gone into them – from scratch. When you have a lot of belief in an idea, it can be tough to accept that others simply aren’t as enthusiastic about it as you are. But the test for a true inventor is whether they can fight back from disappointment.

It’s not always about the product. You have to know when, how and who to market it to. For example, if you want to launch a gift-intended product like the Trio, there’s no value in pitching it to consumers late in the year, when it’s far too late for them to get that product for the upcoming holidays. You just can’t create the enthusiasm required.

They admitted that $15,000 wasn’t going to be enough to get the Fidget Cube completely off the ground, but that it would be a key contribution that they could then back-up with their own funds – it would have paid for the materials and tools required. But they didn’t have to worry with the huge financial influx that they were to get.


It became clear to them that the Fidget Cube wasn’t like any other product that they had tried to launch on Kickstarter before, but it wasn’t until after a few days that they realized how truly extraordinary it was. The invention attracted attention and funds almost straight away, crossing the $100,000 barrier after just four days, but that was still less than 2 percent of what it would end up raising. What really helped to send things into overload was when the Fidget Cube started to go viral on social media – especially when the popular page NowThis Futures shared the product on their Facebook page. That sort of free advertising proved invaluable and the Fidget Cube reached more than two million people straight away who were then able to link others to it. With a direct link from the video to the Kickstarter page, it was easy for people to head over and chip in a few bucks.

They knew soon after just what was happening when the video shot up to tens of millions of views in a mere two days. However, while there is plenty of excitement about what’s been happening with the Fidget Cube, they are doing their best to stay grounded, knowing that there’s still plenty of work to do if they want to turn it from an idea into a popular product.

Production is now underway and they have the intention of taking the product international. Tooling has begun and a factory has been tapped to produce the Fidget Cube. And the brothers have set themselves a strict timeline with the Fidget Cube, in the hope of cashing in on the holiday season.


Those who got on board with the Kickstarter product early would have received it in December, but those who didn’t will have to wait until March – which is still a rapid turnaround time in reality. Progress has b
een good and there haven’t been many production issues to disrupt the timetable. But quality is the priority over quantity. Should anything go wrong or adjustments need to be made, then they would rather set the schedule back than rush and produce an inferior product. After acquiring such a great reputation, what would be the point in putting it all at risk just a few months’ later?

Next for the brothers will be to put together an effective sales strategy that will allow the Fidget Cube to reach the heights that the enthusiasm suggests it can. The product is patent pending and they have teased that there are a few retailers who would be keen on stocking the product. If they get it right, then the McLachlans look set to earn a fortune. With total 100 percent ownership of the Fidget Cube, they remain in full control. But perhaps most amazing of all is that they only needed to make a $5,000 investment themselves for a toy that could make them millions.

Posted on

What Types of Fidget Spinners are there?

Not all fidget spinners are made equally. While they all ultimately serve the same purpose, different finger spinners use different materials, for both the spinner and the bearing. These materials have their advantages and disadvantages, and hence come at different costs. Let’s assess the qualities of these materials, and determine which are best.

Fidget toys started off as a crowd-funded project and now there are a few companies are taking them really seriously and producing some high-quality products. One of the leaders in the industry are Torqbar, who make a variety of metal spinners – currently they sell steel, titanium, copper and brass spinners. Fidget spinners made out of these materials are superior to their counterparts for a few reasons. Firstly, they operate super quietly, so you can happily play with them anywhere.


They are also very equally balanced which helps them to spin more smoothly and for longer. In addition, the bearings inside of the Torqbar spinners are placed very specifically to ensure they spin freely and don’t slow down over time.

The design is undoubtedly going to be a key part of your decision when it comes to choosing a fidget spinner and, while picking the spinner with the best-performing materials is important, there shouldn’t be an exact science in your choice – you should like the look of your spinner and enjoy holding it since you’re going to be fidgeting with it a lot.


Many of the mid-priced fidget spinners on sale are made out of wood. From an aesthetical perspective, these are possibly the classiest and most professional looking of all fidget spinners – they make a nice addition to an office desk. They have solid usability – tending to be lighter than the metal models – and, providing they are taken care of, offer good spinning time. Moreover, like metal spinners, wooden fidget spinners are long-lasting devices.

Fidget spinners come in a few different designs, with anywhere from one to three bearings in a spinner commonplace. It’s purely personal preference, but do remember that you may have a bit more trouble spinning spinners with more bearings, simply because the toy is bigger – it’s especially worth remembering this if you have small hands.


Many of the cheaper fidget spinners on the market are 3D printed and made out of classic. These are popular because they are cheaper than many other of the fidget spinners out there. However, what you make up for in price, you can lose out a little bit in quality. 3D printed fidget spinners tend to be a little louder than others and aren’t quite as durable. That said, they are the perfect type of spinner for people who want a route into fidget spinning, before spending more on a top-of-the-range spinner.


Fidget spinners are still a fresh concept so expect to see much progress in their designs in the future. Since going on sale, they have garnered broad and positive appeal, with nearly everyone who gets one admitting how addictive and fun they are.

Posted on

Cleaning and Fixing your Fidget Spinner

If you have a fidget spinner you’ll know just how satisfying they can be and just how good a toy they can be to pass the time. However, over time, you may find that your finger spinner loses its edge a bit, and that you need to either give it a good clean or make some running repairs to get it back working at maximum speed. These tips will get you on your way.


How to Clean
When you first buy your fidget spinner, the first thing you appreciate is just how quickly it spins. But with use comes wear and tear and the speed will begin to deteriorate, which also means it won’t spin for anywhere near the same length of time – you won’t notice it from use to use, but over an extended period it makes a big difference.

This is usua
lly caused by a build-up of dirt, grease or other particles, and it’s essential that you keep it from accumulating, as it will be harder to clean out if you don’t. Perhaps the most effective way of cleaning the bearing in your fidget spinner is to saturate it in warm water and soap, allowing it to soak – mixing in some citrusy juice can be helpful too. Once soaked for 15 minutes or so, thoroughly dry your bearing and give it a spin. If your spinner still isn’t at optimum speed, repeat the process.

Rubbing in lubricant is another great way of cleaning your finger spinners. However, while lubricants are a good way of speeding up your spinner, as perhaps you would expect, you have to be careful which ones you use, as the bearing is going to be in contact with your skin often and you don’t want it to be an irritant. Hence, use water-based lubricants to clean your fidget spinner.


How to Repair
Repairing your finger spinner is sometimes a more time-consuming process. A general fault is your bearing becoming loose – for your spinner to work properly, there needs to be a tight fit. Try adding a little tape to the bearing if you have this problem, some experimentation may be required.

If your fidget spinner has always been slow, then it’s probably not dirty but needs to be loosened up. A good way to do this is to soak your bearing in a harsher substance such as paint thinner as a lubricant. This will reduce the friction inside the finger spinner and enable you to get the most out of your toy. Lubricants work because they help to separate the metals within the bearing so that they do not touch each other.

Depending on which fidget spinner you buy, your product may come with a warranty, so be certain to exercise that if you have the chance.

To eliminate, or at least reduce the repairs you have to make, ensure you purchase a high-quality finger spinner in the first place which has received great reviews – the initial investment will pay dividends in the long run.

Posted on

Rotablade Stubby: Why This Premium Metal Fidget Spinner is One of the Best

We all need something to keep us occupied during those long hours at work. Fed up with the stress ball and want to try something new? You might want to take a close look at one of the new office fascinations: fidget spinners. These toys, specifically designed to pass time and release nervous energy, are booming. We’re going to have a look at the Rotablade, a $135 spinner that’s one of the most popular right now.

Not everybody can afford the mighty $199 price tag on the Torqbar, which is developed by MD Engineering. That has left people searching for an alternative that boasts similar quality at a lower price. The Rotablade Stubby from EME Tools is the best competitor to the Torqbar right now and there are a few reasons why many users may even think it to be better. The Stubby has been on sale a bit longer than the Torqbar, allowing it to become a fan favorite, and subsequently it’s developed a reputation for its reliability as a solid fidget spinner. Just like the Torqbar has shown itself to be, the Rotablade Stubby is insanely addictive and is a dream to hold and fidget with.

Adding to Rotablade’s respectability in the fidget spinner market, EME Tools have produced a few different Rotablade spinners to show they are by no means a one-trick pony. The Stubby is our focus today though and it comes in four metals. The titanium model is sold at $135 while the brass, stainless steel and copper designs come in nearly $20 lower at $116. The Stubby is very ergonomic and has grooves in which your fingers fit perfectly. You can then spin away with no worry about the spinner hitting anything or stopping. What’s the point, you may ask? It can be hard to ascertain until you’ve had a go, but put simply, fidget spinners are the ideal way of time-wasting quietly when you’re in the office, or to keep you away from bad habits such as chewing your nails or eating that additional biscuit because you have nothing better to do.


For small bits of kit, the Rotablade Stubby does feel somewhat heavy, which is actually a bonus when it comes to fidget spinner. It’s equally-weighted and stays still in your hand, so you can extract longer spin times from it than you would be able to with cheaper finger spinners. The titanium spinner registers at 45 grams, while the heaviest of the four is the copper Stubby at 79 grams. The stainless steel and brass Stubbies fit in somewhere in between. Once you become a seasoned spinner you should be able to get anywhere from two to five minutes of spin time with your Stubby, although don’t worry if you cannot get there instantly – practice makes perfect!

You’ll have no worries about keeping your Rotablade Stubby in tip-top shape either since it comes in a well-made screw-cap tin that complements the spinner itself nicely – the Stubby fits snugly inside and won’t rattle around. But that’s not all. If you aren’t entirely comfortable with the finger pads that come with the Stubby, you can purchase some copper finger pads to use instead which are softer. If you have a few spinners you may be able to utilize the connector which stacks them on top of each other.

Each Rotablade Stubby offers a slightly different spinning experience. The spin-time varies, as does the sound that the spinner makes, while evidently the colors change too. What all Stubby models have in common, however, is their remarkably quiet sound, which is essential. There’s no chance you will hear it in public and you’d need ears like a hawk to detect the unobtrusive sound in a quiet scenario.

The chances are you’re only going to buy the one Stubby so you won’t have much use for the stacking connector, but if you do want to expand your range and pick up a few different designs, then it’s a handy little tool to keep them altogether and it looks rather stylish too, particularly on an office desk. However, the great thing about finger spinners is their compactness and portability – if you start buying a few then it may be a pain to start carrying around all of them with you.


The desk stand is a beautiful accessory that perhaps accompanies your Stubbies better than the connecter does. Even more impressive, you can still spin your spinners when they’re on the desk stand, allowing you to fidget away while keeping both of your hands free. Uniquely, the desk stand can be positioned on its side to fulfil a double duty as a cigar stand. Neat!


Unlike when you’re spinning them in your hand, desktop spinning isn’t quite as discreet since the Stubby is connected onto the table. Hence, when you spin, the vibrations will be felt through the desk creating a noticeable buzz.

Currently, the main drawback with fidget spinners is their tendency to get dirty and lose performance quickly as the particles inside clog up the bearings and slow the spinning speed, and ultimately the total spin-time. You would hope that with its biggish price that the Rotablade Stubby would be immune to such trouble but it is rather susceptible and frustrating. The gritty sound negates the Stubby’s discreet qualities and spin-time can slide significantly.


The good news is there are steps you can take to reverse these effects, and EME Tools have included their own advice so you can treat your Stubby with the required care. Weekly cleaning via an alcohol spray or something similar will help dislodge the particles, lint and whatever else stuck inside the bearings. A few blasts of compressed air will then dry the Stubby far more successfully than by just patting it dry. Do all of this and your Stubbies will get back to somewhere near their best.

The dirt problem is far from unique with the Stubby, with wooden, 3D-printed and metal fidget spinners all having the same teething problems – over time, we imagine these issues will iron out as developers create new designs.

However, that’s all in the future, and you should know how to keep your Stubby in the best possible condition. While EME Tools recommends a weekly cleaning, with such a pricey spinner, we advise that you give it a few sprays as soon as you notice a drop off in performance.

Overall, however, the Rotablade Stubby must be considered one of the best fidget spinners on sale. It’s a true competitor to the Torqbar, and undercuts it quite significantly on price. There’s also more to the Stubby with the connector and desk stand accessories. If you have the means to spend heftily on a spinner, this one should be near the top of your list.


Posted on

Investigating the New Office Craze: Fidget Toys

Do you experience boredom on a regular basis and is it affecting your health? Many who go through the trials and tribulations of a mundane life find themselves adopting unhealthy habits to pass the time – such as biting their nails. Or perhaps they find themselves annoying other people with persistent knocking or by clicking a pen. There have been many toys to help alleviate these issues over the years, but now there’s a toy that has been created specifically to tackle this problem: fidget toys.

Fidget toys have enjoyed a rather unique path to popularity –they were developed as part of a Kickstarter campaign which attracted huge interest and funding. Consider Antsy Lab’s Fidget Cube which picked up more than 400 times its target $15,000, accumulating a mighty $6.4 million. The purpose of a fidget toy? Well, there is none, besides giving you something to fidget with. There are many different tiers of fidget toys now. Seeking something basic? Then the Fidget Cube could be what you’re after, but if you are in search for a top-end product then you may want a metal fidget spinner such as the Torqbar.

Fidget spinners are really ergonomic and do their job fantastically well. Again, they don’t do anything apart from spin – very rapidly once you’ve got the hang of them – but they are extremely satisfying and addictive. They come in all different shapes and sizes, from 3D printed plastic to metal, and even wooden. The weightier metal spinners can spin for more than one minute once you learn the art, and you’ll soon be challenging yourself to beat your best and achieve consistency.


What we Like
Admittedly, the fidget spinner starts off as a very hard sell as it’s difficult to convince someone why they should be interested in a product that ultimately serves no function – they are the most basic of time-passers. However, after a few minutes of twiddling and fiddling, the appeal becomes apparent and people realise just how fun they are to play with.

Besides killing time, do fidget toys offer anything that you could benefit from? While there’s no scientific evidence yet and everything is purely anecdotal, pretty much everyone who has had experience with a fidget spinner or a cube comment on how it has enabled them to cut out their unhygienic habits and eliminate nervous energy. No longer are they chewing their finger nails down to the skin – and even beyond! Moreover, those who tested opined that fidget spinners helped them to keep more in tune with what was happening around them, instead of having their eyes locked to an electronic device every time they got a spare five minutes. The spinners also contributed to an increased level of discipline for office workers, who no longer found them doing unnecessary activities like making that extra cup of coffee. And, since the spinner can be played with in one hand, they could have a spin whenever they felt like it without getting distracted.

If you have and play with a fidget spinner in public, you’ll quickly find that you become the center of attention or at least have a conversation starter. As they are still relatively unknown to the wider population, expect plenty of people to come up to you and ask what you’re doing and even request a go as well. What’s more, you may even find other like-minded spinners to spark up a chat with – the social aspect really cannot be underestimated in today’s world. With so many different types of spinners out there, you can also take your fad to the next level and purchase a few so you’ll never be in danger of getting bored again.

Whether these fidget spinners are really going to help you is something that you’re going to have to find out yourself. Since we are truly in the early stages, no one has anything conclusive to report on how useful and beneficial they actually are. That said, there’s definitely no harm in experimenting with them, and if you don’t want to break the bank straight away, there are plenty of inexpensive plastic spinners out there to get your feet wet.


Our Concerns
It’s fair to say that at the moment there are plenty of shoddy fidget spinners on the market that aren’t worth you investing your money in. While the 3D-printed spinners are good if you just want to try them they aren’t going to be a long-term choice. This is because that the bearings inside start to get stuck after a couple of days, significantly harming the spin-time and hence your enjoyment of the product. You can lubricate them but it’s a short-term fix to a long-term problem and after a while you’ll find the spinner to be more of a nuisance than a pleasure. Furthermore, if your spinner becomes gritty it is going to be noisier, ultimately defeating their purpose of being a silent fidget toy.

When it comes to cleaning your fidget spinner, it’s quite a lengthy ordeal although worth it if you have a high-quality spinner. Either soak them in warm water with some lemon juice, or rub in alcohol. Then ensure that you extensively dry them – take good care of your fidget spinner and it will reward you.


You are probably wondering whether there’s anything to prevent your fidget spinner from becoming gritty and dirty in the first place. From what we found, it depends more on your device than your surroundings – particles are always going to work their way in and get stuck if they have the chance. Therefore, your best bet is to buy a fidget spinner with good reviews, such as those of the Torqbar range – the titanium model is especially popular. Another great brand is Rotablade who make arguably quieter spinners than Torqbar. Follow the advice given with the instructions of each spinner that you buy and use the aforementioned cleaning tips to keep your spinner in good shape – as time goes on, there are sure to be superior cleaning methods developed.

For what you get, you could say that fidget spinners are rather pricey, and the top-end ones are admittedly not cheap. However, you do get what you pay for and if you have trouble with fidgeting and find a device like this to help, it’s surely worth making the investment. Torqbar boast the most expensive fidget spinners right now, with their products ranging between $139 to $199. If you aren’t prepared to make such a purchase then you still have plenty of options. The wooden spinners are really sophisticated and are nearly, if not as attractive as the metal spinners. And, while we’ve given 3D-printed spinners a bit of a hammering, they are really cheap and a spinner is definitely better than no spinner – although, if you do go for one of these, you’re going to have more trouble with grittiness and will probably be forced into buying more spinners which is going to bring your costs up over time.

The fidget spinner is supposed to help bring a sense of calm to somebody instead of work them up, but it’s possible that they could do the opposite if you are the type of person who can get a bit anxious and paranoid – particularly if you’ve shelled out a lot of money on a spinner. Try not to focus too intensely on your spinner’s health and whether it’s slowed down and becoming gritty or you’ll be worrying all the time and getting no satisfaction from it. Obviously keep an eye on any burgeoning problems, but don’t allow them to distract from your fun with a finger spinner. It’s worth pointing out that grittiness isn’t necessarily a severe issue and many spinners don’t experience it at all. The less you think about it, the less it will matter.


Our Final Thoughts
Everybody who trialled out these fidget spinners were positive about their experiences, despite being varied on what products they like. Let’s go over the specific points and comparisons that were made. The overwhelming response was that the higher quality fidget spinners really did thrive, proving that they were worth their heftier price tag. The Torqbar models were a raving success and the Rotablade proved popular too. In comparison, the testers concluded that although the 3D-printed spinners worked for a period, they were inferior to the counterparts. On the whole, fidget spinners, in some shape or form, look like they’re here to stay.

Posted on

Why You Should be Cautious about Buying a 3D-Printed Fidget Spinner

<img class=” wp-image-3840 alignleft” src=”×300.jpg” alt=”” width=”241″ height=”241″ />With so many fidget spinners already on sale, deciding which one is right for you isn’t necessarily easy. Should you make a long-term investment with a more expensive product or opt for one of the cheaper 3D-printed spinners? It’s the latter that we are going to concentrate on in this article. While they’re perhaps decent to have as your first fidget toy, there are a few words of warning that must be mentioned when it comes to these plastic spinners.

The appeal of 3D-printed finger spinners is that they are very cheap compared to metal spinners like the Torqbar, despite doing exactly the same thing. Therefore, you may ask, why bother buying a more expensive one? Because, right now, 3D-printed spinners simply aren’t up to scratch, tending to be more faulty and less durable than their counterparts.

Nowhere is this showcased more starkly than with the spinning quality of the spinners. When you get a new spinner, it’s going to operate exactly as it should – whatever the type – but the test of a good spinner is whether or not it’s susceptible to getting dirty, which damages performance. While metal spinners aren’t immune to problems, they don’t get anywhere near as gritty – nor do they do so as quickly – as 3D-printed spinners.
Moreover, the bearings in fidget spinners have a tendency to be looser, which prevents the spinner from spinning properly. A lack of balance knocks spin-time down considerably, while the absence of a steady build stops the toy spinning with any level of consistency. In comparison to metal spinners, spin time generally is nowhere near as impressive.


While it<img class=” wp-image-3841 alignright” src=”×300.jpg” alt=”” width=”253″ height=”253″ /> is possible to clean a fidget spinner, with 3D-printed spinners you’re going to be left doing it so often that it becomes a chore, sucking all of the enjoyment out of playing with the spinner. In the end, it’ll just end up on the shelf accumulating even more dust.
If you’re looking for a quiet fidget spinner then 3D-printed spinners aren’t going to be for you either. They are naturally a bit louder than metal and wooden spinners, but that noise is exaggerated further when they get dirty which, as we have already concluded, is inevitable.

There are a couple of positives to 3D-printed spinners, one being that they come in lots of different designs and do tend to be more aesthetically appealing than some of the others. The cheap price tag also makes it easier to build up a collection. But neither of these is worth the sacrifice in quality that comes with it.

Ultimately, if your 3D-printed spinner fails you, then the fact that it was cheaper in the first place becomes irrelevant, since you no longer have one at all and are going to need to open your wallet again to get another. You’d be better off making a bigger initial spend on a fidget spinner that will work out to be more cost-effective in the months and years ahead.

Posted on

Torqbar: The Best Finger Spinner in the World

Fidget spinners are one of the most popular new toys out there, giving people a chance to scratch that fidgeting urge and release that nervous energy without getting on anyone else’s nerves in the process. There are a couple of companies developing high-end fidget spinners, and this in article we are going to peruse over the Torqbar range.


Torqbar spinners are extremely new and are quite sparse, so you’re extremely lucky if you can get your hands on one. MD Engineering – makers of the Torqbar – set out to develop a fidget spinner superior to all others, and can be thought of as pioneers in the premium fidget spinner market.


With the fidget spinner community still in its embryonic phases, we are seeing some quite incredible things with the Torqbar right now. While the most expensive spinner comes in at $199, the most dedicated of spinners have been prepared to pay up to double that, purely because of the rarity of them. The tight-knit community are obviously very devoted to the toy and subsequently there are plenty of YouTube videos around showing the Torqbar in use – perfect for wannabe spinners who want to get an idea of what they are like before spending their money.


There are four different Torqbars in product at the moment and there are slight variations in price. The cheapest spinner is the brass Torqbar at $139, the copper and stainless steel designs come in at $149 and $179 respectively, while the big fish, the titanium Torqbar will set you back $199. They are remarkably easy to get the hang of, and the ergonomic, concave finger pads are conducive to a steady hold. Once you’re all set up, you’ll find great satisfaction in flicking the spinner clockwise and anti-clockwise, attempting to keep the Torqbar spinning for longer each time, and that’s their raison d’être. Flicking and fidgeting will become your new addictive hobby, especially with a Torqbar, it’s just far healthier and less annoying than pen-clicking and nail-biting!

So, what are the differences between the four Torqbars? The weight is the key separating factor, with the heaviest Torqbar – the copper model – nigh on twice as heavy as the ultra-light 31-gram titanium Torqbar. The other two spinners are in between, although they lean towards being of a closer weight to the copper than the titanium. These variations lead to differences in spin time. The titanium effortlessly whizzes around for two to three minutes at a time while the brass Torqbar chalks up more than four minutes in a perfect storm. Not that you have to go for long spins – if you’re really fidgety you’ll likely find yourself stopping and re-spinning with regularity.

One of the primary reasons to purchase a high-end metal spinner over a cheaper alternative is the sound – or lack of it. The chances are if you’re buying a fidget spinner at this price you’re doing so because you don’t want to be a distraction to others. With the Torqbar, public use is going to be undetectable and while you will hear the quiet whirring in silence, the chances of others hearing or being bothered by it are decidedly low. We found the sound even to be rather pleasurable and relaxing after a while.

The Torqbar comes with everything you need to take it around with you easily. The box ensures a tight fit and no nuisance-making noises from rattling around, while you can also attach the spinner to a key ring if you want to have it with you at all times – also, you’ve no risk of misplacing, losing or having your Torqbar stolen if you have it secured to a key chain. However, while the key chain is handy, you’ll have to take it off if you want to give it a spin.

It’s an ever-present issue with fidget spinners right now as solutions are sought for the early problems, but keeping the dirt, lint and other particles out of your Torqbar is rather difficult. As a consequence, the spinner gets a bit gritty after a while and is going to majorly knock down your spin time. You’ll know as soon as you’re starting to have an issue with grit, purely because your spinner will sound louder when in action. It’s hard to avoid as it only takes small particles to get in to disrupt things, so instead of prevention, right now, tackling and reducing the side effects is the priority.


Thankfully, MD Engineering are on hand to offer some comprehensive and helpful advice on how to keep the Torqbar specifically in as good condition as feasibly possible. The FAQ section answers just about any question you will have and providing you follow the steps correctly, your spinner – whether it’s the brass, copper, steel or titanium – will recapture its top performance with a thorough cleaning.


How to go about cleaning? You could either soak the Torqbar in some warm soapy water and perhaps with an acidic substance too, or you could choose to spray it with alcohol and rub it into the bearing – either seems to be productive. Once washed, make sure that you totally dry the Torqbar, it helps to spray a few jets of compressed air. When it comes to cleaning, play it by ear and do so when you think it’s becoming gritty as otherwise you could damage the internals long-term. Whether you can hear a noise or not, a weekly clean is about right, although that could vary depending on how often or rarely that you spin the Torqbar. It’s also worth noting that some Torqbars experience less trouble here than others – a couple we tested got gritty quickly while others didn’t at all.

At the end of the day, if you want the best fidget spinner money can buy, the Torqbar fits that billing – grit or no grit. No other spinner fits as comfortably in your hand or spins as quietly. If you have the fidget spinner bug and want the ultimate, then the Torqbar is the one for you.